180 kW DC fast chargers

A 180 kW DC charger is a high-capacity unit for sites that serve many vehicles or large batteries: highway charging hubs, logistics parks, and depots for electric buses and trucks. The power is usually shared across two or more CCS2 guns, so several vehicles can charge at once from one machine.

At this size the charger is only half the project. The power connection, site layout and load management decide how well it performs. Compare the options below and enquire for a free quote and site assessment.

Connector: CCS2Best for: Highway hubs, bus and truck depotsSupply: 3-phase, HT connection

Up to 140 kW

Roadgrid

GRID X Universal Charger

A made-in-India universal charger rated at up to 140 kW, which can be configured with CCS2, Type 6 and AC sockets so one unit serves cars as well as electric two- and three-wheelers. Its 30 to 1000 V output range covers small and large batteries, and it runs on any OCPP 1.6 CMS.

Up to 140 kW output
Cars, 2W and 3W
RFID, OTP, app login

Guns: 2 (configurable)
Connector: CCS2, Type 6, AC socket
Protocol: OCPP 1.6
Output voltage: 30 to 1000 V DC
Efficiency: Above 95%
Protection rating: IP55

Specs as published by Roadgrid Enquire

180 kW

Belectriq

DC CCS2 Charger 180 kW

Belectriq's made-in-India DC CCS2 range runs from 20 to 480 kW with up to four guns, built from stackable power modules, so a 180 kW unit can be specified for your site and raised later. It adds dynamic load management and optional built-in energy storage for sites short on grid power.

20 to 480 kW range
Stackable power modules
ARAI, CE certified

Guns: Up to 4
Connector: CCS2
Protocol: OCPP 1.6J with Autocharge
Output voltage: Up to 1000 V DC
Efficiency: 95% or higher
Protection rating: IP55, IK08

Specs as published by Belectriq Enquire

180 kW

Tetra Motors

Tetra 180

Liquid-cooled dual-gun CCS2 charger for highways and fleets, delivering 90 kW per gun when both are in use. Tetra says it can be upgraded in the field to 240 kW without replacing hardware, and quotes 99% uptime.

Upgradeable to 240 kW
90 kW per gun when shared
Liquid cooled

Guns: 2 (dual gun)
Connector: CCS2
Protocol: OCPP 1.6J
Output voltage: Not published
Efficiency: Not published
Protection rating: IP55

Specs as published by Tetra Motors Enquire

Choosing a 180 kW charger

Guns and sharing

Ask how many guns the unit supports and how it shares 180 kW when all are in use.

Power connection

A 180 kW site generally needs a high-tension supply and its own transformer. Plan this first.

Modular design

Modular chargers can be serviced one module at a time and upgraded as traffic grows.

Uptime and support

Check remote monitoring, spare parts and service response times in your region.

Questions buyers ask

Who needs a 180 kW charger?

Operators expecting heavy traffic, such as highway hubs and fleet depots, and buses or trucks with large batteries. For passenger cars alone, 60 to 120 kW is often enough.

Can cars use a 180 kW charger?

Yes. Any EV with a CCS2 socket can use it. Each car draws only the power it can accept, and the rest can go to other vehicles on the same unit.

Can I buy directly on this website?

No. My EV Charger does not sell chargers. Send an enquiry and verified sellers will contact you with quotes, installation details and timelines.

180 kW DC fast chargers

Compare 180 kW chargers

GRID X Universal Charger

DC CCS2 Charger 180 kW

Tetra 180

Get a quote for a 180 kW charger

Thanks, your enquiry is in

Choosing a 180 kW charger

Guns and sharing

Power connection

Modular design

Uptime and support

Questions buyers ask

India's EV Charging Infrastructure is a Decade-Long Opportunity

My EV Charger - The Intelligence Layer Every Deployment Needs

business@myevcharger.in

Support